What the Top Kit actually adds to a PL4500 or PL4800
The PL4500/PL4800 RGB LED Top Upgrade Kit is an add-on lighting set for the upper portion of a compatible Vertagear PL-series chair. Vertagear describes it as the world's first wirelessly operated RGB gaming chair kit, with customizable illumination and animation effects you can match to a stream, a game, or the mood of the room.
It is sold as a top kit, so it is not the same product as a bottom or full-chair lighting kit. If you are still deciding whether the top section alone is enough for your setup, the box contents below are the quickest way to judge.
What comes in the box, and what each part is for
- What is included in the PL4500/PL4800 RGB LED Top Upgrade Kit?
- The kit ships with one back LED, two front LEDs, two acrylic panes, four 18650 batteries, one magnetic charger, one RF USB receiver, eight M3-6 screws, one Torx screwdriver, and one microfiber cleaning cloth. That is the full hardware list Vertagear supplies for this top kit.
- Do I need to buy batteries separately?
- No. Four 18650 batteries are part of the kit, and a magnetic charger is included for recharging them. The supplied information does not state runtime per charge, so plan around charging rather than assuming a specific number of hours.
- What is the RF USB receiver for?
- The RF USB receiver is the wireless link between the kit and your control source. Vertagear presents the kit as wirelessly operated, so the receiver is the part that makes cable-free control possible. The supplied information does not list a required port type, so check your device's available USB port before setup day.
- Why are there acrylic panes and a cleaning cloth?
- The two acrylic panes are part of the kit's lighting assembly, and the microfiber cloth is included for cleaning. Keep the cloth with the kit rather than borrowing a household rag, since the panes are a clear surface you will want to wipe without grit.
Kit contents at a glance
- PL4500/PL4800 RGB LED Top Upgrade Kit: Kit includes (1) Back LED, (2) Front LED, (2) Acrylic Panes, (4) 18650 Batteries, (1) Magnetic Charger, (1) RF USB, (8) M3-6 Screws, (1) Torx Screwdriver, and (1) Microfiber Cleaning Cloth. Knowing the exact parts helps you confirm nothing is missing before you start and plan which tools you still need.

PL4500/PL4800 RGB LED Top Upgrade Kit - PL4500/PL4800 RGB LED Top Upgrade Kit: The kit is described as the world's first wirelessly operated RGB gaming chair, with fully customizable illumination and vivid animation effects. This is the feature that separates the kit from a simple static light strip, and it explains why the RF USB receiver is in the box.
Mounting and setup questions
- How do I mount the RGB LED top kit on my chair?
- The kit supplies eight M3-6 screws and a Torx screwdriver, which indicates the LEDs are fixed with screws rather than adhesive. The supplied information does not include a step-by-step mounting diagram or torque values, so follow the printed instructions that ship with the kit and do not overtighten the M3 screws into the chair.
- Which chair models is this top kit for?
- Vertagear names the PL4800 gaming chair in the kit description, and the product title covers PL4500/PL4800. The supplied information does not list every compatible model, so if you own a different Vertagear chair, confirm fit before ordering rather than assuming the top kit is universal.
- Do I need to remove the chair's existing top panels?
- The supplied information does not describe a removal procedure or specify which panels the LEDs attach to. Treat the printed instructions as the authority here, and avoid prying at chair parts based on guesswork.
- Can I set up the kit without connecting it to a PC?
- The kit is wirelessly operated and includes an RF USB receiver, which points to a host device for control. The supplied information does not confirm standalone operation without that receiver, so plan to use the RF USB as part of setup.
Troubleshooting the lights and wireless link
- The LEDs will not light up. What should I check first?
- Start with power. The kit runs on four 18650 batteries, so confirm they are charged with the included magnetic charger and seated correctly. Then check that the RF USB receiver is connected to your device. The supplied information does not include a reset procedure, so if both checks pass and the lights stay dark, contact Vertagear support rather than opening the LED housings.
- The wireless control is unreliable. What can I try?
- Because the kit is wirelessly operated through the RF USB receiver, physical obstructions and distance between the receiver and the chair are reasonable first suspects. Move the receiver to a clear port and keep the chair in the same room during testing. The supplied information does not specify a wireless range, so avoid assuming a maximum distance.
- One LED section behaves differently from the others.
- The kit has one back LED and two front LEDs, so a single misbehaving section narrows the problem to that unit or its connection. Check the screws and battery seating before assuming the LED itself has failed. The supplied information does not describe per-section replacement parts, so treat a persistent fault as a support question.
Care and maintenance for the long run
- How should I clean the acrylic panes and LEDs?
- Use the included microfiber cleaning cloth. The supplied information does not name a cleaning solution or confirm that any liquid is safe on the panes, so start dry and avoid spraying cleaner directly onto the LEDs or into the housings.
- How should I store and charge the 18650 batteries?
- Use the included magnetic charger and keep the four batteries together as a set so you always know which cells belong to the kit. The supplied information does not give a charging time, storage voltage, or replacement interval, so follow the charger's own indicators and replace cells only with a matching type.
- What maintenance keeps the kit looking and working its best?
- Dust the panes with the microfiber cloth, keep the RF USB receiver in a stable port, and periodically confirm the M3-6 screws are still snug. Vertagear does not supply a maintenance schedule in the available information, so treat these as sensible habits rather than a manufacturer-prescribed routine.
What the kit does not tell you, and why it matters
The available product information covers what is in the box and what the lighting is designed to do, but it does not include a mounting diagram, a battery runtime figure, a wireless range, or a cleaning solution recommendation. That is a limitation of the supplied evidence, not a sign that the kit is missing those features.
The practical takeaway is to keep the printed instructions and the included Torx screwdriver together with the kit, and to treat the RF USB receiver and the four 18650 batteries as the two parts most likely to need attention over time. At a catalog price of USD 194.99 against a comparison price of USD 299.99, the top kit is a focused upgrade rather than a full-chair lighting package, so buy it for the upper-chair look you want and confirm model fit before you order.


